60 Degree Brackets, 12 pcs, for MakerBeam

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

• Length tolerance: +/- 0.2mm
• Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)

Set Screw Set, M3 x 4, 20 pcs, with Allen key for MakerBeam, MakerBeam XL & OpenBeam

PREMIUM Starter Kit MakerBeam (hollow core & threaded) Aluminum, Clear Anodised: Beams, Brackets, Nuts and Bolts

PREMIUM Starter Kit MakerBeam Aluminum, Clear Anodised: Beams, Brackets, Nuts and Bolts

MakerBeam 10mm x 10mm Mini-T profiles with beams in different lengths.

These beams are clear anodised. The Mini-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

50 Mini T-slot profile beams clear anodised: 4x 300mm, 8x 200mm, 6x 150mm, 16x 100mm, 8x 60mm, 8x 40mm
60 brackets: 24x 90 degree, 12x 60 degree, 12x 45 degree, 12x corner brackets, 12 corner cubes with bolts
1 bag of square headed nuts and 1 bag of Bolts (M3), 250pcs. each, and 1 hex nutdriver.

Gooseneck, 200mm, 1pcs.

The gooseneck literally provides more flexibility in helping you work on your electronics project. The gooseneck is 200mm in length. One end of the gooseneck has M3x0,5x7mm male threads, while the other end has M3x0,5x5mm female threads.

PREMIUM Starter Kit MakerBeam (hollow core & threaded) Aluminum, Black Anodised: Beams, Brackets, Nuts and Bolts

PREMIUM Starter Kit MakerBeam Aluminum, Black Anodised: Beams, Brackets, Nuts and Bolts

MakerBeam 10mm x 10mm Mini-T profiles with beams in different lengths.

These beams are black anodised. The Mini-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

50 Mini T-slot profile beams black anodised: 4x 300mm, 8x 200mm, 6x 150mm, 16x 100mm, 8x 60mm, 8x 40mm
60 brackets: 24x 90 degree, 12x 60 degree, 12x 45 degree, 12x corner brackets, 12 corner cubes with screws
1 bag of square headed nuts and 1 bag of Bolts (M3), 250 pcs. each, and 1 hex nutdriver.