Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)

100mm MakerBeamXL, 4pcs., Aluminum anodised

4 pcs. 100mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces.

150mm MakerBeamXL, 4pcs., Aluminum anodised

4 pcs. 150mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces.

Bag of M3 bolts with square head, 25mm for MakerBeam, 25pcs

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

• Length tolerance: +/- 0.2mm
• Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam

Set of Bearings:
- Bearings 633ZZ (10 pieces)
- Square headed bolts (10 pieces)
- Nuts (10 pieces)

750mm MakerBeamXL, 1pcs., Aluminum anodised

1 pcs. 750mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces.