10mm MakerBeam Profiles and Accessories
The MakerBeam system is based on Mini T-slot profiles. MakerBeam is a versatile structural system. The components give you endless building possibilities in miniature size.
More sub catagories:
|
|
|
|||||||||
|
|
|
|||||||||
New products
 |
750mm Linear Slide Rail, 1pcs. for MakerBeam and MakerBeamXL1 piece of 750mm linear slide rail (750mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm), compatible to MakerBeam and MakerBeamXL. For use with MakerBeam T-slot nuts it is best to use our linear slide kit. Attention: For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the Linear Slide Kit Art-Nr. 05m3lskitp05. 48,50 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)2,50 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
Joint Plate for Carriage of Linear Rails with Bolts 1 pcs.Joint Plate for Carriage of Linear Rails with Bolts 1 Stk. Compatible to MakerBeam und MakerBeam XL Contains:
1x Carriage Joint Plate (40mm x 20mm x 3mm) 8,50 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
Set Screw Set, M3 x 4, 20 pcs, with Allen key for MakerBeam, MakerBeam XL & OpenBeam4,95 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XLKnurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way. The screws are M3 x 0.5 x 10 and are suited for MakerBeam and MakerBeam XL. 5,95 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XLKnurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way. The screws are M3 x 8 and are suited for MakerBeam and MakerBeam XL. 5,65 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit. Attention: For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the Linear Slide Kit Art-Nr. 05m3lskitp05. 16,50 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
Allen Key (2mm) for MakerBeam and MakerBeam XL, 1pcs.1,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
 |
Gooseneck, 200mm, 1pcs.The gooseneck literally provides more flexibility in helping you work on your electronics project. The gooseneck is 200mm in length. One end of the gooseneck has M3x0,5x7mm male threads, while the other end has M3x0,5x5mm female threads. 2,98 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: in stock
|
