Handle Black for MakerBeam XL Profiles

3D-printed handle (material: PLA), black for MakerBeam XL profiles

200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam

1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit.

Attention:

For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the  Linear Slide Kit Art-Nr. 05m3lskitp05.

Handle Gray for MakerBeam XL Profiles

3D-printed handle (material: PLA), gray for MakerBeam XL profiles

200mm MakerBeamXL, 4pcs., Aluminum anodised

4 pcs. 200mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces.

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

• Length tolerance: +/- 0.2mm
• Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

1 Thread Cut M3x6

1 cut of one M3x6 thread at the end of a beam out of your current order.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have a thread cut into which end, please.

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.