100mm MakerBeam (threaded), 16 pcs, black anodised

90 Degree Blind Fastener for MakerBeamXL

A bag of 50 bolts, an allen key and a drill bit to create a blind connection through a 3mm sized hole into the threaded end of another profile.

Bag of M3 bolts with square head, 20mm for MakerBeam, 50pcs

Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)

Triangular Inner Corner Bracket for MakerBeamXL 15mm x 15mm , 12pcs., stainless steel

1 bag of MakerBeamXL triangular inner corner brackets contains 12 pieces.

The triangular inner corner bracket is designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles. The brackets will add stiffness and rigidity to your design. A bag of triangular corner brackets holds 12 pieces.

M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 8 and are suited for MakerBeam and MakerBeam XL.

200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam

1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit.

Attention:

For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the  Linear Slide Kit Art-Nr. 05m3lskitp05.