Vinyl End Caps for OpenBeam & MakerBeamXL, black, 4pcs.

MakerBeam XL Starter Kit Black Anodised

Starter Kit MakerBeamXL Black Anodised: Beams, Brackets, Nuts and Bolts

MakerBeamXL 15mm x 15mm Midi-T profiles with beams in different lengths.

These beams are anodised in black. The Midi-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

Beams: 8 x 300mm, 8 x 200mm, 8 x 150mm, 8 x 100mm, 8 x 50mm
Stainless Steel Brackets:  24x L-brackets, 24x T-brackets
Nuts&Bolts: hexagon head screws (~100 pcs.), button head socket screws (~100 pcs.), bag of nuts (~250 pcs.)
Accessories: 8x feet for OpenBeam, 1x hex nut driver, 1x hex key driver

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

• Length tolerance: +/- 0.2mm
• Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

200mm MakerBeamXL, 4pcs., Aluminum anodised

PREMIUM MakerBeam XL Starter Kit Clear Anodised in Storage Box

PREMIUM Starter Kit MakerBeamXL Clear Anodised: Beams, Brackets, Nuts and Bolts, in Storage Box

MakerBeamXL 15mm x 15mm Midi-T profiles with beams in different lengths.

These beams are clear anodised. The Midi-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

Beams: 8 x 300mm, 8 x 200mm, 8 x 150mm, 8 x 100mm, 8 x 50mm
Stainless Steel Brackets:  24x L-brackets, 24x T-brackets, 12x corner cubes
Nuts&Bolts: hexagon head screws (~100 pcs.), button head socket screws (~100 pcs.), bag of nuts (~250 pcs.)
Accessories: 8x feet for OpenBeam, 1x hex nut driver, 1x hex key driver

Gooseneck, 200mm, 1pcs.

The gooseneck literally provides more flexibility in helping you work on your electronics project. The gooseneck is 200mm in length. One end of the gooseneck has M3x0,5x7mm male threads, while the other end has M3x0,5x5mm female threads.

M3 x 0.5 x 10 Knurled Screw, 4 pcs, for MakerBeam, MakerBeam XL & OpenBeam

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 0.5 x 10 and are suited for MakerBeam, MakerBeam XL, and OpenBeam.