Allen Key (2mm) for MakerBeam and MakerBeam XL, 1pcs.

PREMIUM MakerBeam XL Starter Kit Black Anodised in Storage Box

PREMIUM Starter Kit MakerBeamXL Black Anodised: Beams, Brackets, Nuts and Bolts, in Storage Box

MakerBeamXL 15mm x 15mm Midi-T profiles with beams in different lengths.

These beams are anodised in black. The Midi-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

Beams: 8 x 300mm, 8 x 200mm, 8 x 150mm, 8 x 100mm, 8 x 50mm
Stainless Steel Brackets:  24x L-brackets, 24x T-brackets, 12x corner cubes
Nuts&Bolts: hexagon head screws (~100 pcs.), button head socket screws (~100 pcs.), bag of nuts (~250 pcs.)
Accessories: 8x feet for OpenBeam, 1x hex nut driver, 1x hex key driver

200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam

1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit.

Attention:

For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the  Linear Slide Kit Art-Nr. 05m3lskitp05.

M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 0.5 x 10 and are suited for MakerBeam and MakerBeam XL.

Carriage for linear slide

This linear slide carriage can be used as an extra carriage for our linear slides or linear guide rails article numbers 05ls0200p01 (200mm), 05ls0300p01 (300mm) and 05ls0600p01 (600mm).

Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam

Set of Bearings:
- Bearings 633ZZ (10 pieces)
- Square headed bolts (10 pieces)
- Nuts (10 pieces)

Hinge bearings 633ZZ, nuts and bolts, 5 sets, for MakerBeam

Hinge bearings:
- Bearings 633ZZ (10 pieces)
- Copper saddle band clips (5 pieces)
- Axes (6 long bolts in 3 lengths: 30mm, 50mm and 60mm)
- Teflon tape (180mm)