60mm MakerBeam (threaded), 8 pcs, Aluminum, anodised

Customers who bought this product also bought the following products:

	Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut) 2,50 EUR (19 % VAT incl. excl. Shipping costs)

	M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way. The screws are M3 x 8 and are suited for MakerBeam and MakerBeam XL. 5,65 EUR (19 % VAT incl. excl. Shipping costs)

	M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way. The screws are M3 x 0.5 x 10 and are suited for MakerBeam and MakerBeam XL. 5,95 EUR (19 % VAT incl. excl. Shipping costs)

	50mm MakerBeamXL, 4pcs., Aluminum clear anodised 4 pcs. 50mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces. 4,65 EUR (19 % VAT incl. excl. Shipping costs)

	1 Thread Cut M3x6 1 cut of one M3x6 thread at the end of a beam out of your current order. Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have a thread cut into which end, please. Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting. 2,00 EUR (19 % VAT incl. excl. Shipping costs)

	1 Cut to Custom Length 1 cut of a beam out of your current order with a length according to your specification. Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost. After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6). Achievable precision: Length tolerance: +/- 0.2mm Cut plane tilt angle: <1° Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting. 2,00 EUR (19 % VAT incl. excl. Shipping costs)