Deutsch English

Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam

Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam
Zoom image

14,00 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: in stock

Product no.: 05brgp10
Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam

Set of Bearings:
- Bearings 633ZZ (10 pieces)
- Square headed bolts (10 pieces)
- Nuts (10 pieces)

The bearing is 5mm thick. The outside dimension of the bearing is 13mm. The inside diameter measures 3mm. If you fit it to a beam it will extend about 1,5mm from the edge of the beam. The 3mm inner diameter makes is easy to mount on a M3 bolt.

Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam Bearings 633ZZ, Bolts and (self locking) Nuts, 10 pcs each, for MakerBeam

Customers who bought this product also bought the following products:

M3 x 0.5 x 10 Knurled Screw, 4 pcs, for MakerBeam, MakerBeam XL & OpenBeam

M3 x 0.5 x 10 Knurled Screw, 4 pcs, for MakerBeam, MakerBeam XL & OpenBeam

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 0.5 x 10 and are suited for MakerBeam, MakerBeam XL, and OpenBeam.

5,95 EUR (19 % VAT incl. excl. Shipping costs)
Allen Key (2mm) for MakerBeam and MakerBeam XL, 1pcs.

Allen Key (2mm) for MakerBeam and MakerBeam XL, 1pcs.

1,00 EUR (19 % VAT incl. excl. Shipping costs)
1000mm MakerBeamXL, 1pcs., Aluminum Black anodised

1000mm MakerBeamXL, 1pcs., Aluminum Black anodised

9,00 EUR (19 % VAT incl. excl. Shipping costs)
Polystyrene Sheet white, 300mm x 200mm x 3mm

Polystyrene Sheet white, 300mm x 200mm x 3mm

5,95 EUR (19 % VAT incl. excl. Shipping costs)
360mm MakerBeamXL, 9pcs., Aluminum Black anodised

360mm MakerBeamXL, 9pcs., Aluminum Black anodised

33,00 EUR (19 % VAT incl. excl. Shipping costs)
200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam

200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam

1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit.

Attention:

For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the  Linear Slide Kit Art-Nr. 05m3lskitp05.

15,50 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Friday 06 September, 2013.

[<<First] | [<Back] | [Next>] | [last>>] | Product 3 of 7 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

MakerBeam B.V.
MakerBeam B.V.
More products

Manufacturer