Deutsch English

chartup.com System Engineering GmbH

chartup.com System Engineering GmbH

Show 1 to 10 (of in total 10 products) Sites:  1 
1 Cut to Custom Length

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

  • Length tolerance: +/- 0.2mm
  • Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

2,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 1 Week

1 x '1 Cut to Custom Length' order Details

1 Thread Cut M3x6

1 Thread Cut M3x6

1 cut of one M3x6 thread at the end of a beam out of your current order.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have a thread cut into which end, please.

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

2,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 1 Week

1 x '1 Thread Cut M3x6' order Details

Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)

Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)

2,50 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'Combination Spanner, Wrench Size 5,5 (1pcs; for M3 Hex Bolt and Nut)' order Details

 

Handle Black for MakerBeam XL Profiles

3D-printed handle (material: PLA), black for MakerBeam XL profiles

5,95 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'Handle Black for MakerBeam XL Profiles' order Details

Handle Gray for MakerBeam XL Profiles

Handle Gray for MakerBeam XL Profiles

3D-printed handle (material: PLA), gray for MakerBeam XL profiles

5,95 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'Handle Gray for MakerBeam XL Profiles' order Details

Joint Plate for Carriage of Linear Rails with Bolts 1 pcs.

Joint Plate for Carriage of Linear Rails with Bolts 1 pcs.

Joint Plate for Carriage of Linear Rails with Bolts 1 Stk. Compatible to MakerBeam und MakerBeam XL

Contains:

 

1x Carriage Joint Plate (40mm x 20mm x 3mm)
4x Countersunk Bolts M3x6 (DIN 7991 hexagon socket, stainless A4)

8,50 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'Joint Plate for Carriage of Linear Rails with Bolts 1 pcs.' order Details

M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 8 and are suited for MakerBeam and MakerBeam XL.

5,65 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL' order Details

M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 0.5 x 10 and are suited for MakerBeam and MakerBeam XL.

5,95 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'M3 x 10 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL' order Details

M3 x 6 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

M3 x 6 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL

Knurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way.

The screws are M3 x 6 and are suited for MakerBeam and MakerBeam XL.

4,95 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'M3 x 6 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XL' order Details

Set Screw Set, M3 x 4, 20 pcs, with Allen key for MakerBeam, MakerBeam XL & OpenBeam

Set Screw Set, M3 x 4, 20 pcs, with Allen key for MakerBeam, MakerBeam XL & OpenBeam

4,95 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: in stock

1 x 'Set Screw Set, M3 x 4, 20 pcs, with Allen key for MakerBeam, MakerBeam XL & OpenBeam' order Details

Show 1 to 10 (of in total 10 products) Sites:  1 

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Bestsellers

Customer group


Customer group: Guest

Manufacturer