Customers who bought this product also bought the following products:
100mm MakerBeamXL, 4pcs., Aluminum anodised4 pcs. 100mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces. 6,20 EUR (19 % VAT incl. excl. Shipping costs) |
|
200mm MakerBeamXL, 4pcs., Aluminum anodised4 pcs. 200mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces. 9,60 EUR (19 % VAT incl. excl. Shipping costs) |
|
1000mm MakerBeamXL, 1pcs., Aluminum anodised1 pcs. 1000mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces. 10,60 EUR (19 % VAT incl. excl. Shipping costs) |
|
M3 x 0.5 x 8 Knurled Screw, 4 pcs, for MakerBeam & MakerBeam XLKnurled screws come in handy in the building process. These screws allow you to easily loosen or tighten a bracket without using a driver. Tweaking your project is easier this way. The screws are M3 x 8 and are suited for MakerBeam and MakerBeam XL. 5,65 EUR (19 % VAT incl. excl. Shipping costs) |
|
200mm Linear Slide Rail, 1pcs. for MakerBeam, MakerBeam XL and OpenBeam1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and MakerBeamXL or OpenBeam. For use with MakerBeam T-slot nuts it is best to use our linear slide kit. Attention: For mounting of the linear slider rail onto a 10mm MakerBeam profile you would need to use M3x5 bolts. We suggest to use the Linear Slide Kit Art-Nr. 05m3lskitp05. 19,95 EUR (19 % VAT incl. excl. Shipping costs) |
|
Gooseneck, 200mm, 1pcs.The gooseneck literally provides more flexibility in helping you work on your electronics project. The gooseneck is 200mm in length. One end of the gooseneck has M3x0,5x7mm male threads, while the other end has M3x0,5x5mm female threads. 2,98 EUR (19 % VAT incl. excl. Shipping costs) |
|
This Product was added to our catalogue on Saturday 03 May, 2014.