750mm MakerBeamXL, 1pcs., Aluminum anodised

1 pcs. 750mm x 15mm x 15mm Aluminum profiles with T-slots for M3 bolts / nuts, continuous core hole and M3x8 thread at the front surfaces.

Polystyrene Sheet white, 300mm x 200mm x 3mm

1 Thread Cut M3x6

1 cut of one M3x6 thread at the end of a beam out of your current order.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have a thread cut into which end, please.

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

1 Cut to Custom Length

1 cut of a beam out of your current order with a length according to your specification.

Add a comment to your order specifying which profile(s) out of which pack (in case there are more than one profiles in a pack) you want to have cut to which length, please. During the cutting process approx. 3.0mm of the total (original) beam length will be lost.

After cutting a MakerBeam profile there will only be the hollow core at the cut surface. If needed an M3 thread will need to be cut separately (see 1 Thread Cut M3x6).

Achievable precision:

• Length tolerance: +/- 0.2mm
• Cut plane tilt angle: <1°

Please Note: Custom Cut Profiles are non-returnable, except for us clearly having made a mistake upon cutting.

PREMIUM Starter Kit MakerBeam (hollow core & threaded) Aluminum, Clear Anodised: Beams, Brackets, Nuts and Bolts

PREMIUM Starter Kit MakerBeam Aluminum, Clear Anodised: Beams, Brackets, Nuts and Bolts

MakerBeam 10mm x 10mm Mini-T profiles with beams in different lengths.

These beams are clear anodised. The Mini-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

50 Mini T-slot profile beams clear anodised: 4x 300mm, 8x 200mm, 6x 150mm, 16x 100mm, 8x 60mm, 8x 40mm
60 brackets: 24x 90 degree, 12x 60 degree, 12x 45 degree, 12x corner brackets, 12 corner cubes with bolts
1 bag of square headed nuts and 1 bag of Bolts (M3), 250pcs. each, and 1 hex nutdriver.

PREMIUM Starter Kit MakerBeam (hollow core & threaded) Aluminum, Black Anodised: Beams, Brackets, Nuts and Bolts

PREMIUM Starter Kit MakerBeam Aluminum, Black Anodised: Beams, Brackets, Nuts and Bolts

MakerBeam 10mm x 10mm Mini-T profiles with beams in different lengths.

These beams are black anodised. The Mini-T slot is suitable for M3 Bolts.

The Regular Starter Kit contains:

50 Mini T-slot profile beams black anodised: 4x 300mm, 8x 200mm, 6x 150mm, 16x 100mm, 8x 60mm, 8x 40mm
60 brackets: 24x 90 degree, 12x 60 degree, 12x 45 degree, 12x corner brackets, 12 corner cubes with screws
1 bag of square headed nuts and 1 bag of Bolts (M3), 250 pcs. each, and 1 hex nutdriver.